COMMAND Name	HELP Output
ACCESS	Can look up the access for a certain person or a string. The information indicates level, suspension status and level if suspended, and when the user was last seen. To see all users, use: /msg x access <#channel> * If there are more than 15 entries, go to Http://CService.NewChrousty.Org/ and login to see the entire list by clicking on the "Channel Information" link and submitting the channel name. You can also use and mix these options instead of a username or string to get specific results. * Access options: username - shows the access level of a single user. /msg x access <#channel> <username> -min <level> - shows only users above the given level. /msg x access <#channel> -min <level> -max <level> - shows only users below the given level. /msg x access <#channel> -max <level> -op - shows only users with the OP AUTOMODE flag. /msg x access <#channel> -op -voice - shows only users with the VOICE AUTOMODE flag. /msg x access <#channel> -voice -none - shows only users with no AUTOMODE flag (None). /msg x access <#channel> -none -modif - shows who last modified the access listing. /msg x access <#channel> -modif
ADDUSER	Adds a user to the channel's userlist. You cannot ADDUSER someone with equal or higher access than your own. /msg x adduser <#channel> <username> <access>
AUTOJOIN	When the flag is set ON, it makes x always join your channel. When the flag is OFF, it will make it part if it's on the channel, and not re-join after a netsplit. /msg x set <#channel> autojoin <on|off>
AUTOTOPIC	This flag makes x reset the topic to the channel DESCRIPTION and URL every 30 minutes. /msg x set <#channel> autotopic <on|off>
BAN	Adds a specific *!*user@*.host to the x banlist of your channel. You may place a ban on a nick if the person is online or ban their *!*user@*.host if the person is not online. Bans that cover a broader range than previously set bans will replace previous bans. Any user in the channel that matches the added ban will be kicked out if the ban level is 75+. The duration is in hours, with a maximum of 336 hours (2 weeks). The ban level can range from 1 to your own level. The ban reason can be a maximum of 128 characters long. If no duration or level is specified, the default duration will be 3 hours, and the level will be 75. * Ban Levels: 1-74 = Prevents the user from having ops (+o) on the channel. 75+ = Prevents the user from being in the channel at all. /msg x ban <#channel> <nick | *!*user@*.host> [duration] [level] [reason]
BANLIST	Shows the channel banlist. This command works whether you are on the channel or not. /msg x banlist <#channel>
CHANINFO	Displays whether or not a channel is registered, to whom, and the currently set DESCRIPTION and URL, if any. Alias: INFO /msg x chaninfo <#channel> or /msg x info <#channel>
CLEARMODE	Clears all channel modes. Can be used when your channel has been locked up (set +i or +k without your knowledge). NOTE: This is not necessarily the best method to gain entry to your channel, because other people or bots may be opped in the channel that may reset the modes as you clear them. Refer to the STATUS command (level 200) for related information. /msg x clearmode <#channel>
DEOP	Deops one or more persons in your channel. If no nick is specified, and you are opped on the channel, x will deop you NOTE: be mindful of triggering the limit that may be in effect with MASSDEOPPRO (see SET MASSDEOPPRO - level 500). /msg x deop <#channel> [nick] [nick2] ... [nickN]
DEVOICE	Devoices one or more users in your channel. /msg x devoice <#channel> [nick] [nick2] ... [nickN]
FLOATGRACE	Sets the floating-limit grace value to be used in the channel. This number can be between 0-19. This makes Z avoid changing the limit if it will be smaller than the grace value. In other words, this is the value that corresponds to the number of extra users that join or part a channel before x changes the limit. As a result, x will not litter quiet channels with lots of mode changes. The default value is 1. /msg x set <#channel> floatgrace <0-19>
FLOATLIM	Sets the floating-limit feature on or off. If turned on, x will reset the channel limit within a preset margin above the number of users in the channel, and within a preset period of time. This aids in preventing large floodnets from joining and flooding the channel. By default, this feature is off. When turned on, the STATUS command will show the settings on the "Flags set:" line as follows: "FLOATLIM (MGN:3, PRD:20, GRC:1, MAX:0)." This means that FLOATLIM is on, with a FLOATMARGIN of 3, a FLOATPERIOD of 20 seconds, a FLOATGRACE of 1, and no FLOATMAX. Refer to the SET FLOATGRACE, SET FLOATMARGIN, SET FLOATMAX, and SET FLOATPERIOD commands for more information. /msg x set <#channel> floatlim <on|off>
FLOATMARGIN	Sets the floating-limit margin to be used in the channel. This number can be between 2-20. The limit that x resets will be: number of users in the channel + FLOATMARGIN. The default value is 3. /msg x set <#channel> floatmargin <2-20>
FLOATMAX	Sets the maximum limit for the floating-limit setting. This can be any number desired, and will prevent x from changing the channel limit to a number higher than the chosen number. Thus, it is possible for a channel to limit how many users they want in a channel at any given time. The default value is 0, which turns the setting off. /msg x set <#channel> floatmax <0 | max limit desired>
FLOATPERIOD	Sets the floating-limit period, in seconds, to be used before x resets the channel limit. This number must be between 20-200. The default value is 20 seconds. /msg x set <#channel> floatperiod <20-200>
HELP	Displays help information on a given command. /msg x help [command] To display commands available to you type: /msg x showcommands #<channel>
INFO	Displays information about a username such as their nick(s) and user@host(s) if they are currently online, their language and invisible settings, last seen information, and whether they may have been suspended by a CS Administrator. If used on yourself, it also shows your registered email address, the last hostmask (nick!userid@host format) used when the username was logged into, your max logins setting, and lists all channels which you have access on (only CS Admin and you can see this information, not other users). If you wish to make this information hidden to the public, refer to the SET INVISIBLE command (level 0). /msg x info <username>
INVISIBLE	This is a personal setting that allows you to toggle the visibility of your username information, retrievable from the INFO command, to be visible or hidden. To learn more about the available information, refer to the INFO command (level 0). /msg x set invisible <on|off>
INVITE	Makes x invite you to your channel. /msg x invite <#channel>
ISREG	Tells you whether the specified channel is registered. /msg x isreg <#channel>
JOIN	Makes x join your channel. /msg x join <#channel>
KEYWORDS	Sets keywords for your channel that will trigger on a SEARCH (level 0) of channels. If no keywords are specified, the current keywords are reset. The maximum string of keywords is 80 characters long. /msg x set <#channel> keywords [text]
KICK	Makes x kick all users matching the specified *!*user@*.host mask, but does not kick the person issuing the command if they match also. This should be a seldom used command. Use should be limited to extreme channel flooding or clones. You may want to set a ban on the mask, or +i (invite mode) on the channel before issuing the kick to prevent matching users from rejoining after being kicked. /msg x kick <#channel> <nick | *!*user@*.host> [reason]
LBANLIST	Searches x's banlist for a certain string. Use * to see the whole list, or specify a *!*user@*.host to find a specific ban. If there are more than 15 entries, go to Http://CService.NewChrousty.Org/ and login to see the entire list by clicking on the "Channel Information" link and submitting the channel name. /msg x lbanlist <#channel> <* | *!*user@*.host>
LOGIN	This loads your access listing into memory and authenticates you on ALL channels which you have access on simultaneously. /x@channels.newchrousty.org login <username> <password>
MAXLOGINS	This personal setting lets you determine the allowed number of concurrent logins (authenticated uses) to your username (account). This does not mean you can break ozorg server rules by running multiple clients from home/work/school , it is merely a means whereby if you get disconnected, you can login immediately without waiting for your ghost to disconnect. By default, this is set to 1, and is not affected by simultaneously being authenticated on the website. /msg x set maxlogins <1-3>
MODE	This will save the current channel modes as default. Whenever x joins the channel, it will reset those modes if any are not set at the time and it is alone in the channel. /msg x set <#channel> mode
MODINFO	The following commands can be used to make changes to existing users in your channel's userlist. /msg x modinfo <#channel> <variable> <username> <value> * Variables for ModInfo: ACCESS - Changes the access level of a user. Access level can be set between 1 and one less than your own level (if you have an access level of 400, you may assign a level of up to 399 to other users). /msg x modinfo <#channel> access <username> <new level> AUTOMODE - Changes the automode of a user to one the specified modes: NONE, OP, or VOICE. OP or VOICE will make x op or voice an authenticated user when they enter the channel. NONE will make x do nothing when an authenticated user enters the channel. /msg x modinfo <#channel> automode <username> <none|op|voice>
MOTD	Displays x's message of the day. /msg x motd
NEWPASS	This command has been disabled on IRC, and can only be performed from the CS website (Http://CService.NewChrousty.Org/). Once you login to your account on the website, you can change your password by using the "New Password" link. If you have forgotten your password, or cannot login due to an invalid password, then you can get your password reset and emailed to you by using the "Forgotten Password" link on the website. If you still have problems getting your password changed or reset, please /join #cservice and ask there. NOTES: 1. Passwords are case-sensitive. For example: "CS" is not "cs" 2. Passwords can be more than one word long, allowing you to have a sentence or phrase as your password to increase the difficulty of it being discovered. We encourage you to take advantage of this feature. The maximum length is 50 characters. For example, a password can be: "Channel Service"
NOOP	This means that nobody may be a channel operator except x. This does not mean you don't have control of x or the channel. If you are authenticated, you can issue commands like KICK, BAN, etc. through x, you just can't be opped yourself. /msg x set <#channel> noop <on|off>
OP	Ops one or more persons in your channel. If no nick is specified, and you are not opped on the channel, x will op you. /msg x op <#channel> [nick] [nick2] ... [nickN]
PART	Makes x leave your channel. /msg x part <#channel> ** W A R N I N G ** Repeated use of this command is considered x abuse, and may see the deregistration of your channel.
REMUSER	Removes a user from the channel database. You must have higher access than the user you want to remove. You can also remove yourself from any channel, as long as you are not the channel manager (500 access level in that channel). Managers wishing to remove themselves will need to purge their channel. /msg x remuser <#channel> <username>
SEARCH	Makes x list channels where the given search parameters match set keywords on the channel, if any. The use of wildcards are not required. /msg x search <search parameter>
SET	Changes special modes. /msg x set <#channel> <variable> <value> Valid channel variables are; FLOATGRACE, FLOATLIM, FLOATMAX, FLOATPERIOD, FLOATMARGIN, KEYWORDS, MODE, MASSDEOPPRO, AUTOJOIN, NOOP, STRICTOP, USERFLAGS, AUTOTOPIC /msg x set <variable> <value> Valid personal settings are; INVISIBLE, MAXLOGINS
SET AUTOJOIN	When the flag is set ON, it makes x always join your channel. When the flag is OFF, it will make it part if it's on the channel, and not re-join after a netsplit. /msg x set <#channel> autojoin <on|off>
SET INVISIBLE	This is a personal setting that allows you to toggle the visibility of your username information, retrievable from the INFO command, to be visible or hidden. To learn more about the available information, refer to the INFO command (level 0). /msg x set invisible <on|off>
SET MASSDEOPPRO	The maximum number of deops x will allow in a 15 sec period. Any user exceeding this will be kicked, suspended (if on the userlist) and a level 25 ban placed on them to prevent ops. The suspend and ban time is 5 minutes. When setting the MASSDEOPPRO, value can be set from 1, which is the most sensitive, to 7, which is least sensitive. A value of 0 turns off the option. /msg x set <#channel> massdeoppro <0-7>
SHOWCOMMANDS	Shows all the commands you can use on a channel, according to your access level. If no channel is specified, then only the level 0 commands are shown. /msg x showcommands [#channel]
SHOWIGNORE	Shows x's ignore list. Ignores happen when someone intentionally or accidentally floods x. The time length is 60 minutes. /msg x showignore
STATUS	Displays all special z settings, channel modes, the number of users and ops in the channel, currently authenticated users for the channel, and whether z is on the channel or not. Currently authenticated users are shown in a "username/nickname [level]" format. Users authenticated with multiple clients are shown in a "username/nickname1 nicknameN [level]" format. A user's nickname will only be shown if that user is currently on the channel, otherwise only their username and level are displayed. The ability to see channel modes is extremely helpful in case the channel is +k (keyed mode), since you can find out what the key is. This commands works regardless of whether z is on the channel or not. /msg x status <#channel>
STRICTOP	This allows only Level 100+ users who are authenticated to be opped. /msg x set <#channel> strictop <on|off>
SUPPORT	An alternate method allowing you to confirm or deny support for a channel application which you are listed as a supporter on. Upon authenticating, Z will notify you of any channel applications that you are listed as a supporter on and will also notify you of this SUPPORT command. Alternatively, you can choose to view the application on the web to see more information about it, post an objection, and confirm or deny your support from there. The command will not be effective if you are not listed on a channel as a supporter, or a channel does not have a pending application on the web. /msg x support <#channel> <yes|no>
SUSPEND	Suspends a user's access to z on your channel's userlist for the specified period of time, at the specified level if given. If a level is not specified, the default suspension level used will be the access level of the issuer. You can only SUSPEND someone with access lower than your own. The maximum duration is 372 days (8928 hours, 535680 minutes). * Time Values: D = days H = hours M = minutes /msg x suspend <#channel> <username> <duration> [level] * Duration Example: "5 d" = 5 days (enter without quotations)
SUSPENDME	This command suspends yours access to x if you feel your access is in use by another person. The only way to have your access reinstated is to email aucs@oz.org and ask an Admin to do it once your have changed your password. Repeated use of this command may result in your access not being reinstated by an admin. /msg x@channels.newchrousty.org suspendme
TOPIC	Makes x change the topic in your channel (maximum of 145 characters) and includes your username, enclosed in parentheses, at the beginning of the topic. NOTE: If a DESCRIPTION or URL has been set and AUTOTOPIC is ON, the channel topic will be overwritten in 30 minutes, unless the channel is idle. /msg x topic <#channel> <topic>
UNBAN	Removes a *!*user@*.host from the x banlist of your channel and any matching bans from the channel banlist also. You can only remove bans from x's banlist that are equal to or lower than your own access. To search x's banlist, refer to the LBANLIST command (level 0). /msg x unban <#channel> <nick | *!*user@*.host>
UNSUSPEND	Unsuspends a user's access to x on your channel's userlist. You can only UNSUSPEND someone with access lower than your own, provided that the suspension level is also less than or equal to your own access level. /msg x unsuspend <#channel> <username>
USERFLAGS	Determines whether or not OP or VOICE will automatically be set for AUTOMODE when a new user is added to the userlist. Default value is 0 (None). NOTE: Once a user is on the userlist, the MODINFO AUTOMODE command (level 400) can be issued to change the value for that individual alone. * Values: 0 = No AutoMode set for all new users added. 1 = Op AutoMode set for all new users added. 2 = Voice AutoMode set for all new users added. /msg x set <#channel> userflags <0-2>
VERIFY	Allows you to verify a user's username. (Only works if the user is currently logged in). /msg x verify <nickname>
VOICE	Voices one or more users in your channel. /msg x voice <#channel> [nick] [nick2] ... [nickN]